|
|
Summary |
 |
- Line quality
- Up to 32 channels (simultaneous) - 2 Tel line min.
- Voice and Fax
- Modular in accordance with your requirements
- GlobalTT guarantees satellite resources
- Covered by IS-10, IS-1R, W6, AB-3
|
Introduction
Line quality |
The SES100 FARAWAY uses audio compression rates of 8 Kbps in compliance with the G.729A recommendations of UIT. Group III fax and telephone communications are supported by normal output (type RJ11 FXS analog 2 Wires) |
Up to 32 channels |
The V-Sat SES100 FARAWAY from GlobalTT is supplied with 2 analogue channels (two-wire) Tel FXS as standard. It can be provided on a multiple chassis (8ch times 4chassis) with 32 channels or circuits; in other words ± 25 to 100 users can share the equipment depending on their traffic. |
Simultaneous calls |
The V-Sat SES100 Faraway supports simultaneous communications. Each line is fully independent.
- Calls between 2 SES100 (simultaneously)
- Fax reception (simultaneously)
- Telephone call reception (simultaneously)
- Overseas telephone calls
|
Service provider |
Thanks to our satellite beams and our multi-user equipment, GlobalTT.com is able to provide telephony services for several remote subscribers: telephone service. |
Multi-chassis |
Group III fax and voice band data are supported over the voice ports with no additional daughter-cards or modification required. |
Specifications
Full Mesh Single Hop |
The SES100 FaraWay system employs a full mesh network architecture, enabling single hop VSAT to VSAT voice and data calls, minimizing delay and allowing for call routing through the optimal PSTN gateway in a multiple gateway environment. |
DAMA Voice |
Demand Assigned Multiple Access (DAMA) operation is used by SES100 FaraWay to assign satellite voice circuits on demand, thus ensuring efficient use of satellite circuits according to actual user needs. |
Toll-quality voice and ITU standard implementation |
SES100 FaraWay employs toll-quality voice compression of 8 kbps (ITU G.729A ), and is in compliance with echo cancellation ITU recommendation G.165. |
Single modem/single carrier operation |
The SES100 FaraWay unique FTDMA access scheme, allows the support of up to 8 voice channels over a single modem, a configuration typical of thin-route applications. A single modem transmits a single carrier, so no costly RF back-off is required, and a low-power ODU can be used, which results in additional cost savings, reliability, power consumption savings, and simplicity. |
Group 3 fax and voice band data |
Group III fax and voice band data are supported over the voice ports with no additional daughter-cards or modification required. |
Encryption (option) |
The SES100 FaraWay system incorporates an advanced encryption algorithm over all voice and fax upon request providing full security for network users. The encryption is based on AES (Advanced Encryption Standard) recommendations, using a 128 bit encryption- key -size |
Very low power consumption |
SES100 FaraWay's very low power consumption (over 80% lower than typical SCPC systems) is a major advantage where power is not available, resulting in cost savings on solar panels, batteries and UPS. .Additional power savings of up to 50% are achieved by the implementation of the automatic "sleep mode". This feature enables the system to enter into a hibernation state when no voice or data activity is detected at the site, and automatically return to active mode when activity is detected. |
Transportable applications |
The SES100 FaraWay network is fitted with mobile solutions, for ground or air transportation, where very fast deployment of a communication network is required (e.g. for military camps, or disaster areas where the telecom infrastructure is damaged), providing instant voice, fax and data communication to remote locations. |
Easy expansion |
Small networks can start without a hub, and as requirements grow and thousands of additional remote sites can be installed. Similarly, a small site can start, with only 2 channels of voice, and then grow up to 16 channels without any costly RF or power changes. |
Fully integrated ODU |
GlobalTT offers a line of fully integrated ODUs supporting the SES100 FaraWay, which are controlled through the FaraWay IDU, or remotely via the SES100 FaraWay hub, thus lowering costs and eliminating the need for additional indoor control equipment. |
Applications
- Industries, mining, oil and gas, agriculture
- Private networks
- Call-shops, business centres
- Government offices, embassies
- NGOs, UNO, caritative missions, ...
- Remote Bank Branches
Examples :
SES100 FaraWay enables businesses to expand the reach of their corporate networks to remote areas. Since SES100 FaraWay is designed to provide multiple services utilizing a single platform, remote office users connected to the network can perform day-to-day business communications such as high-quality telephone calls and conferences, high-speed fax transmissions. SES100 FaraWay was designed for flexible utilization of available satellite and remote resources for any type of on-demand voice.
SES100 FaraWay enables telephony services of uncompromising quality to underserved regions.
Services include telephone kiosks in villages, payphones in rural areas or full-scale town networks, each providing a transparent interface to the user.
Network

Architecture: DAMA FTDMA, full mesh, SINGLE HOP.
Capacity: up to 8,000 remote stations.
Frequency bands: Ku-band, C-band.
Modulation: QPSK.
Forward error correction: Rate 3/4.
BER = 10-6 (FEC 3/4): Eb/No = 7.2 dB.
BER = 10-4 (FEC 3/4): Eb/No = 6.0 dB.
IF frequency: 70MHz.
Telephony interfaces : FXS (2 wires)
Signaling standards:
DTM
Decadic (Impulsions).
Facsimile:
Group III, up to 9.6 Kbps
Voice:
Voice encoding: ITU G.729A, 8 Kbps CS-ACELP.
Echo cancelling: ITU G. 165.
Technical description
Outdoor unit :
Transceiver/LNA: 4Watts, 2Watts
Antenna size: 98cm , 1.2m, 1.8m or 2.4meters
Operating temperature: -40° to + 60°C
Humidity: Weatherproof
Indoor unit :
Number of ports: 1 to 8 per chassis ; chassis are stackable
Operating voltage: AC : 110Vac or 220Vac, 50/60 Hz
Power consumption: 30W to 50W per chassis, depending of number of ports (130W for 8 ch.)
Dimensions: 17.7 cm (h) x 43.7 cm (w) x 42.7 cm (d)
Weight (chassis): 8.5 kg
Rack operating temperature: 0° to 50°C
Humidity (chassis): Up to 95%, non-condensing
|
|